DreamUp Lan утиліта для прошивки іміджів

[roger5000]

Утиліта для прошивки іміджів

This nice utility is what I use to upload and flash my dreambox. You can choose the menu language, and it is very important to follow the instructions that are showing while it uploads. Before starting, make sure all your cables and connections are good, nothing loose and do not pull on the lan cable while uploading an image....Failure to do so will mean you have to upload an image again using the Null Modem Cable. Trust me. I tried .

The first step ufter unpacking the zip file and installation is to connect to the Dreambox. You will have to enter the IP of your box. (Screenshot 1) and then press either quick flash or save mode (I would sugggest save mode, and laterr when more familiar with the thing try the quick)

So you press "Save Mode" and then "Connect". You will get a "Welcome" message (screenshot 2). Obviously if your DB is a different type one the message will be slightly different.

Then you press "Send Login" and after that "Send Password". You don't have to put any password or similar, they seem to be already in the program. You will then get the "BusyBox" message (Screenshot 3).

After that you are ready to load up an iamge. Press "Send File, and a up pops a pop up where you can choose the image file. This needs to be an *.img file and not a zipped file. (screenshot 4).

The file will then be loaded onto your Dreambox.

The next steps are "Erase". When you press this, a warning message appears. Press ok, and you have started the road of no return. There is a status report on the bottom left corner of the window.

When the erase is finished, you will get a message that the flash is erased , and that you can continue to program. Press the "Flash Box" and pray.
When everything is finished, you get the "Congratulation" Message

Screen Shots: