Smart Rapido 2 JTAG

1. Build a simple jtag (see jtag_simple.jpg) and connect pc and rec (rec is turn off).
2. Connect rec and wait for loading.
3. Launch SMART_UP_2.2_XP.exe, choose 2MB and working LPT.
4. Push 'Start' and wait for message:
Init JTAG
IDCODE : 1D405041
CPU : STi5518
Stop CPU
Clear Trap : Please Wait...
Load Trap -> Ram : Please Wait...
Load Trap : LEN Ok
Init Trap : Please Wait...
Trap_Wptr 80000534
Trap_Iptr 80000140
Start Trap  : Please Wait...
Load EMI : Please Wait...
Init OK :)
---------------------
5. Now you can read, erase or write flash. Otherwise, check cable, connection and try 
again until init is ok.

To read flash - press 'Read', enter file name for dump and wait for succesful finish.
To write flash first erase flash (press 'Erase' and wait for finish), then write - press 'Write', 
choose dump file, and wait for message "Write Flash END".
After flashing don't forget restart your magic rec ;)



.:made by Fisher:.
__www.frocus.net__

_____________________
if u aren't happy, try again ;)