Український SAT-TV форум

Приймачі DVB-S/S2 => Samsung => Інші приймачі з Ему => Samsung DSR-9400 => Тема розпочата: samsi від 13:53:10, 12 Листопада 2007

Назва: Samsung9400 (Questions in English only)
Відправлено: samsi від 13:53:10, 12 Листопада 2007
Hello!!

I´m sorry I can´t write and read your language so i have to post it in english!!

I also have a 9400 receiver with embedded cryptoworks CI, does the embedded cryptoworks CI work with the E*mu or will the CI be switched off??

Which Bootloader is necessary for the E*mu??
On my receiver Loaderversion 111 is installed.

Could you please write a readme.txt in english?
What´s the difference between 9400 EMU 1.0 and 1.1 and how can i install the E*mu soft on the receiver??? (with SemcoEdit and Com Scart??)

 
I hope someone could help me!
Thanks in advance!!
Назва: Samsung9400 (international section)
Відправлено: Android-80 від 15:31:19, 12 Листопада 2007
For the load of soft through com it is necessary to have bootloader 404. If bootloader 703 it is needed it will be to use JTAG.
Назва: Samsung9400 (international section)
Відправлено: Android-80 від 15:39:43, 12 Листопада 2007
9400 EMU V1.0 used for the load of software through Jtag,а 9400 EMU V1.1 for a load through COM
Назва: Samsung9400 (international section)
Відправлено: samsi від 19:27:04, 12 Листопада 2007
Thank you does anyone have bootloader 404 please??
Where can the file be downloaded???

What is with the embedded cryptoworks CI does this enybody know??

Thanks!
Назва: Samsung9400 (international section)
Відправлено: Android-80 від 09:42:50, 13 Листопада 2007
In order to give a right answer you describe that for you it is written in system information :coolsmiley:
Назва: Samsung9400 (international section)
Відправлено: samsi від 18:12:54, 13 Листопада 2007
Ok thank you but i dont understand you what do you mean by that??
Назва: Samsung9400 (international section)
Відправлено: bodyan від 18:44:26, 13 Листопада 2007
Doesn't know how correctly to explain to you. I don't think that this Cryptoworks card will work after changing firmware
How to get bootloader 404? First of all you need to download this firmware (http://sat-ukraine.info/index.php?action=dlattach;topic=878.0;attach=665) with Jtag. Also you must have  card and programmator to program card.

How to do this you can read here (http://sat-ukraine.info/index.php?action=dlattach;topic=878.0;attach=712)
Назва: Samsung9400 (international section)
Відправлено: samsi від 19:05:47, 13 Листопада 2007
Ok i understand you the bootloader is in this FW 1.0 so i have to put it with jtag on the receiver and then i have bootloader 404!!
I saw in the download section a file called dsr 9400 loader 404 is this only the loader??

I know the "how do" thank you
If i save my original FW with jkeys can i always return to my original SW?
Назва: Samsung9400 (international section)
Відправлено: Android-80 від 20:42:33, 13 Листопада 2007
If i save my original FW with jkeys can i always return to my original SW?
Yes,you always return to original SW with program Jkeys ;)
Назва: Samsung9400 (international section)
Відправлено: samsi від 08:50:12, 14 Листопада 2007
Thank you i thought with the bootloader its the same like samsung 9*500 there you have to cange the loader and then you can do everything with r*s 232 port!!

Thank you very much!!
Назва: Samsung9400 (international section)
Відправлено: Android-80 від 09:57:54, 14 Листопада 2007
If will you have questions, not put restraint, but ask? ;)
Назва: Samsung9400 (international section)
Відправлено: samsi від 14:25:48, 14 Листопада 2007
@Android-80 Thank you
Назва: Samsung9400 (international section)
Відправлено: samsi від 14:14:13, 19 Листопада 2007
Hi!!

I saw in the info file that in the soft works the E*mu 3.8 why 3.8??
The newest one is 6.2 or??

I also found a Emu_9400v1.1.txt in the arcive form E*mu1.1 could anybody please translate it  :confused:

Thanks in advance!!
Назва: Samsung9400 (international section)
Відправлено: Android-80 від 14:49:32, 19 Листопада 2007
EMU of 9400 v1.1

That new:

- The load of the keys and CAID-list is completed.
    Now these information can be loaded in the dear mode and on completion
     a receiver will save Them. Unnecessary to commute a receiver from a stand.

- It is corrected Kard-sharing.
   From now on "fumbling" is possible longer :).  Test.


File for a load through com-port!

With kind regards.

 m@rio
Назва: Samsung9400 (international section)
Відправлено: samsi від 15:05:22, 19 Листопада 2007
Big thanks to you i dont understand everything now but thanks for the translation!!

And do you know why E*mu 3.8 and not 6.2 what can 3.8 do??
Назва: Samsung9400 (international section)
Відправлено: samsi від 16:54:32, 20 Листопада 2007
Hello
Today i tried to programm the SW 1.0 to my Samsung 9400 and ther is standing "error programming flash at offset 0x000005c"???
Does anybody know what i did wrong?? :confused:

Please help me!! Thanks
Назва: Samsung9400 (international section)
Відправлено: samsi від 14:44:50, 21 Листопада 2007
Ok now i have Software 1.1 on my box and i also programmed a fun card 5 with the files form Fun_card_EMU9*400 but in menue in c*as embbeded it shows me "no Card"???

What did i wrong??
Назва: EMU_9400v1.1
Відправлено: samsi від 13:55:33, 23 Листопада 2007
Hello can please anyone upload a rom.bin file which contains the new ke*y from D+ because by me they doesent work!!
Mario wrote something about them a few posts over this one!!
 
Thank you
а 30.9.07  19:50

Polsat - -
D+     - -
(поновлюєм ключі)

Новий Канал -  - (статика)
ТРК Україна  -  - (статика)
Назва: EMU_9400v1.1
Відправлено: Android-80 від 14:09:18, 23 Листопада 2007
To SAMSI! :) In this branch you always to load the fresh keys:
http://sat-ukraine.info/index.php?topic=146.15
Назва: EMU_9400v1.1
Відправлено: samsi від 15:09:55, 23 Листопада 2007
Thank you but it doesnt work i dont know what im doing wrong the card(Fun) is in the slot and the ram.bin is in the receiver!!
Can you halp me please??
Назва: Samsung9400 (international section)
Відправлено: samsi від 14:58:22, 24 Листопада 2007
Hi can anyone upload the fun files for the funcard because when i will programm the card there always appears "wrong checksum" in external e*eprom!!
Назва: Samsung9400 (international section)
Відправлено: Android-80 від 15:25:48, 24 Листопада 2007
Hi can anyone upload the fun files for the funcard because when i will programm the card there always appears "wrong checksum" in external e*eprom!!
Try it:
Назва: Samsung9400 (international section)
Відправлено: samsi від 18:54:05, 24 Листопада 2007
Special thanks to you Android-80!
Назва: Samsung9400 (international section)
Відправлено: samsi від 08:36:54, 26 Листопада 2007
Ok now i programmed the funcard and the receiver showes me that it is a v*iacc*ses card but nothing is working in the info file is written "it’s necessary to insert the card with CONAX CA to activate the EMU" so could this be the problem??

I hope anyone can help me please
Назва: Samsung9400 (Questions in English only)
Відправлено: gad від 13:23:06, 30 Листопада 2007
All OK
Назва: Samsung9400 (Questions in English only)
Відправлено: samsi від 14:18:30, 30 Листопада 2007
Thank you gad!!

Gread work

Thank you!!
Назва: Samsung9400 (Questions in English only)
Відправлено: samsi від 16:19:26, 27 Травня 2008
Hallo!

How can i change CAID witch programm is necesarry where can i get an actual caid list from astra?

When i press twice EXIT botton i can see the Caid but i cant change it with +/-

Thanks
Назва: Samsung9400 (Questions in English only)
Відправлено: samsi від 16:27:50, 03 Червня 2008
Hello!

I have a question is ORF on Astra 12692000Khz H 2200 for you working?
Please give me an answere!

Thanks
Назва: Samsung9400 (Questions in English only)
Відправлено: samsi від 19:52:50, 06 Червня 2008
Hello!

Thanks