Приймачі DVB-S2 (sh4) > Enigma2 / Neutrino
Enigma 2 Nightly Build
bodyan:
Enigma 2 Nightly Build: 0.9.2 version
--- Цитувати ---release 0.9.2
*********************
- fixed Polsat HD channels and many other HD channels (i.e.: Sky Calcio HD, Sky Olimpia HD and so on)
- updated kernel to version 2.6.23.17-0123
- added gdata for python plugins
- added romanian language (thanks to otheitis and his team)
- improved remote controller responses time
- made general OS system optimizations
- updated Enigma2 CVS to the 13/03/2010
- fixed USB booting for: cuberevo-mini-fta, cuberevo-250hd, cuberevo-2000hd (usb file system must be ext2 type)
- added wifi drivers (zd1211 chipset, if you need them do an insmod /lib/modules/zd1211b.ko)
P.S.: PIP is temporarily disabled.
For USB version boot (file system must be ext2 type): mkfs.ext2 -I 128 -b 4096 your_device
where your_device could be /dev/sdaX, /dev/sdbX, or similar.
Enjoy it! Tideglo
--- End quote ---
Сторінка завантаження
ioan:
Вийшов свіжий реліз енігми ,для IP910 можна взяти тут
http://upload.dvhk.pl/content.php?id=138397
Увага- невеликий баг
спочатку ностроюєте мережу і скануєте канали
потім заходите в блу-панель, інакше зелений єкран
bodyan:
Enigma 2 Nightly Build: 0.9.5 version
Нова версія з численною кількістю виправлень/вдосконалень. Версія отримала схвальні відгуки користувачів, з помічених багів варто відмітити відсутність звуку при перемиканні з сд каналів на хд в режимі скарт.
Зміни:
--- Цитувати ---release 0.9.5
*********************
- перейдено знову на STLinux 2.2 через деякі помилки в аудіо на STLinux 2.3: коли я це виправлю, ми знову повернемось на stlinux 2.3
- додано програвач файлів wmv
- додано функцію мульти декодування: тестовано тільки з incubusCamd 0.99 котрий цілком підтримує мультидекодування
для e2 (previous version don't work, and i don't know if other softcams works or not, just test them)
- виправлення деяких помилок памяті на h264 каналах
- виправлено клавіші дистанційного управління з активацією телетексту
- виправлено падіння DVDPlayer
- кнопки DVDPlayer тепер відображаються краще ніж перед цим
- підтримка аудіо DTS на файлах mkv
- інші виправлення МедіаПлеєра
- оновлено грецьку локаль
- оновлено болгарську локаль
- додано samba (not started by default, you have to add it on the rcS_user.sh if you need it)
- додано cp2101 external card reader drivers (load it in rcS_user.sh if you need it: /lib/modules/cp2101.ko)
- додано ralink rt2870 wireless chipset drivers (load them in rcS_user.sh if you need it: /lib/modules/rt2870sta.ko)
- додано підтримку Freesat ЕПГ
- by default the sci-ng driver (pacco's 1.4 version) is loaded at enigma2's boot: this is a temporary option, i built a
sc driver but still getting many memory errors, i don't know when it will be full ready
- оновлено Enigma2 CVS до 02/05/2010
- активовано знову функцію кадр в кадрі , перегляд двох каналів у кадрі в кадрі зумовлює сповільнене відтворення, тому це не працює на 100%
Enjoy it! Tideglo
--- End quote ---
Завантажити
bodyan:
Enigma 2 Nightly Build: 0.9.6 version
--- Цитувати ---- виправлено багато помилок з мультидекодуванням (тепер повинні декодуватись 2 канали на різних тюнерах)
- виправлені деякі падіння пам'яті програвача
- оновлений CVS Enigma2 від 25/05/2010
--- End quote ---
Завантажити
roger5000:
Enigma 2 Nightly Build: 0.9.7 version
--- Цитувати ---release 0.9.7
*********************
- enabled the possibility to use "openvpn --auth-user-pass FILE" command
- update openvpn to last stable release (it should solve problems on connection timeout)
- fixed the bug on recordings playback
- fixed RGB green color on Scart
- fixed AutoSwitch on Scart (so you can set if enable it or not in the enigma2 menu, this is not true
if the receiver is in standby mode: this means you will have always the signal trhought TV scart if something connected to the VCR Scart)
- fixed widesignal over the Scart connector
- fixed Scart's signals on cuberevo-250hd
- some other fixes on Scart to send the good signal to let other devices know that a signal is present
- fixed a bug on tuxtxt
- fixed the bug: channel name on front display when standby mode active in some casual cases
- fixed the bug: channel name on front display when standby mode active after that mediaplayer is used
- added fw_env.config in /etc/ directory, on flash you can edit it in the /var/etc/ directory (usefull for ippe's multibood editor plugin)
- fixed osd screenshot on webif
- /mnt/ directory is now writeable in flash version
- /media/ directory is now writeable in flash version
- little fixes for screen resolution mode changing
- fixed the reading for front panel display settings
- fixed the reading for time settings (let me know if you will find other bugs on getting correctly the time)
- fixed webremote on webinterface
- updated timezone list, more option available now same as the standard (if you find any kind of problem just report it)
- on flash version: now CleanupWizard should not ask you all the time to free the space left
- added possibility to update Date/Time automatically using the CuberevoVFD plugin (usefull for first enigma2 start: just press the yellow button
on the plugin screen and when you will exit from the plugin, the channel tuned will get updates for current date/time)
- fixed many e2 pathes to prevent from unwanted crashes
- optimized a bit the free space (now enigma2 should take less space than previous versions)
- Unicable should be better usable now
- added TuxboxPlugins plugin (wich should run old tuxbox *.so plugins: default directory where to place plugins is "/usr/lib/tuxbox/plugins/")
- first try fix for zd1211b and added also zd1211 wireless driver (insmod the zd1211.ko or zd1211b.ko module if you need to use it)
- first try fix for rt2870/rt3070 wireless driver (insmod the rt3070sta.ko module if you need to use it)
- update Enigma2 CVS to 03/07/2010
About wireless drivers: please report if they are working or not (i can't test them directly)
Enjoy it! Tideglo
--- End quote ---
Завантажити
Навігація
Go to full version