Автор Тема: DreamUp Lan утиліта для прошивки іміджів  (Прочитано 2728 раз)

0 Користувачів і 1 Гість дивляться цю тему.

Відсутній roger5000

  • Модератор
  • Ветеран
  • *****
  • Повідомлень: 1064
  • Рейтинг: +2835/-1
  • м Тернопіль
Утиліта для прошивки іміджів
Цитувати
This nice utility is what I use to upload and flash my dreambox. You can choose the menu language, and it is very important to follow the instructions that are showing while it uploads. Before starting, make sure all your cables and connections are good, nothing loose and do not pull on the lan cable while uploading an image....Failure to do so will mean you have to upload an image again using the Null Modem Cable. Trust me. I tried .

The first step ufter unpacking the zip file and installation is to connect to the Dreambox. You will have to enter the IP of your box. (Screenshot 1) and then press either quick flash or save mode (I would sugggest save mode, and laterr when more familiar with the thing try the quick)

So you press "Save Mode" and then "Connect". You will get a "Welcome" message (screenshot 2). Obviously if your DB is a different type one the message will be slightly different.

Then you press "Send Login" and after that "Send Password". You don't have to put any password or similar, they seem to be already in the program. You will then get the "BusyBox" message (Screenshot 3).

After that you are ready to load up an iamge. Press "Send File, and a up pops a pop up where you can choose the image file. This needs to be an *.img file and not a zipped file. (screenshot 4).

The file will then be loaded onto your Dreambox.

The next steps are "Erase". When you press this, a warning message appears. Press ok, and you have started the road of no return. There is a status report on the bottom left corner of the window.

When the erase is finished, you will get a message that the flash is erased , and that you can continue to program. Press the "Flash Box" and pray.
When everything is finished, you get the "Congratulation" Message

Screen Shots:






 

Прошивка для Openbox S1 PVR, S2HD, S2HD Mini і S2HD+ mini PVR

Автор bodyanРозділ S1 PVR, S2HD PVR, S2 Mini HD, S3 Mini HD

Відповідей: 75
Переглядів: 88152
Остання відповідь 11:28:30, 08 Грудня 2017
від bodyan
[UFS 912] DuckBA - Barry allen для Kathrein UFS 912

Автор bodyanРозділ Enigma2 / TitanNit / Neutrino

Відповідей: 1
Переглядів: 7846
Остання відповідь 09:30:17, 03 Листопада 2011
від bodyan
[DM 800HD PVR] Іміджі для SIM 1.0 (ssl #69, ssl #70, ssl #72 )

Автор OgirokРозділ Dreambox HD

Відповідей: 24
Переглядів: 25705
Остання відповідь 14:08:53, 23 Червня 2014
від bodyan
[DM 800HD PVR] Іміджі для SIM 2.01 (ssl #76, ssl #82, ssl #84 )

Автор bodyanРозділ Dreambox HD

Відповідей: 171
Переглядів: 132828
Остання відповідь 19:44:47, 03 Грудня 2019
від tibi
Прошивка для Amiko SHD-8320 CX, SHD-8330 CX E, SHD-8340 CICX E

Автор bodyanРозділ STHD-8820, HD-8100, 8200, 8340, 8330, 8320

Відповідей: 0
Переглядів: 7721
Остання відповідь 10:31:43, 31 Жовтня 2016
від bodyan