Автор Тема: Samsung9400 (Questions in English only)  (Прочитано 7593 раз)

0 Користувачів і 1 Гість дивляться цю тему.

Відсутній samsi

  • Новачок
  • *
  • Повідомлень: 19
  • Рейтинг: +0/-0
Samsung9400 (Questions in English only)
« : 13:53:10, 12 Листопада 2007 »
Hello!!

I´m sorry I can´t write and read your language so i have to post it in english!!

I also have a 9400 receiver with embedded cryptoworks CI, does the embedded cryptoworks CI work with the E*mu or will the CI be switched off??

Which Bootloader is necessary for the E*mu??
On my receiver Loaderversion 111 is installed.

Could you please write a readme.txt in english?
What´s the difference between 9400 EMU 1.0 and 1.1 and how can i install the E*mu soft on the receiver??? (with SemcoEdit and Com Scart??)

 
I hope someone could help me!
Thanks in advance!!

Відсутній Android-80

  • Ветеран
  • *****
  • Повідомлень: 3002
  • Рейтинг: +3750/-0
Samsung9400 (international section)
« Відповідь #1 : 15:31:19, 12 Листопада 2007 »
For the load of soft through com it is necessary to have bootloader 404. If bootloader 703 it is needed it will be to use JTAG.

Відсутній Android-80

  • Ветеран
  • *****
  • Повідомлень: 3002
  • Рейтинг: +3750/-0
Samsung9400 (international section)
« Відповідь #2 : 15:39:43, 12 Листопада 2007 »
9400 EMU V1.0 used for the load of software through Jtag,а 9400 EMU V1.1 for a load through COM

Відсутній samsi

  • Новачок
  • *
  • Повідомлень: 19
  • Рейтинг: +0/-0
Samsung9400 (international section)
« Відповідь #3 : 19:27:04, 12 Листопада 2007 »
Thank you does anyone have bootloader 404 please??
Where can the file be downloaded???

What is with the embedded cryptoworks CI does this enybody know??

Thanks!

Відсутній Android-80

  • Ветеран
  • *****
  • Повідомлень: 3002
  • Рейтинг: +3750/-0
Samsung9400 (international section)
« Відповідь #4 : 09:42:50, 13 Листопада 2007 »
In order to give a right answer you describe that for you it is written in system information :coolsmiley:

Відсутній samsi

  • Новачок
  • *
  • Повідомлень: 19
  • Рейтинг: +0/-0
Samsung9400 (international section)
« Відповідь #5 : 18:12:54, 13 Листопада 2007 »
Ok thank you but i dont understand you what do you mean by that??

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Samsung9400 (international section)
« Відповідь #6 : 18:44:26, 13 Листопада 2007 »
Doesn't know how correctly to explain to you. I don't think that this Cryptoworks card will work after changing firmware
How to get bootloader 404? First of all you need to download this firmware with Jtag. Also you must have  card and programmator to program card.

How to do this you can read here

Відсутній samsi

  • Новачок
  • *
  • Повідомлень: 19
  • Рейтинг: +0/-0
Samsung9400 (international section)
« Відповідь #7 : 19:05:47, 13 Листопада 2007 »
Ok i understand you the bootloader is in this FW 1.0 so i have to put it with jtag on the receiver and then i have bootloader 404!!
I saw in the download section a file called dsr 9400 loader 404 is this only the loader??

I know the "how do" thank you
If i save my original FW with jkeys can i always return to my original SW?

Відсутній Android-80

  • Ветеран
  • *****
  • Повідомлень: 3002
  • Рейтинг: +3750/-0
Samsung9400 (international section)
« Відповідь #8 : 20:42:33, 13 Листопада 2007 »
If i save my original FW with jkeys can i always return to my original SW?
Yes,you always return to original SW with program Jkeys ;)

Відсутній samsi

  • Новачок
  • *
  • Повідомлень: 19
  • Рейтинг: +0/-0
Samsung9400 (international section)
« Відповідь #9 : 08:50:12, 14 Листопада 2007 »
Thank you i thought with the bootloader its the same like samsung 9*500 there you have to cange the loader and then you can do everything with r*s 232 port!!

Thank you very much!!

Відсутній Android-80

  • Ветеран
  • *****
  • Повідомлень: 3002
  • Рейтинг: +3750/-0
Samsung9400 (international section)
« Відповідь #10 : 09:57:54, 14 Листопада 2007 »
If will you have questions, not put restraint, but ask? ;)

Відсутній samsi

  • Новачок
  • *
  • Повідомлень: 19
  • Рейтинг: +0/-0
Samsung9400 (international section)
« Відповідь #11 : 14:25:48, 14 Листопада 2007 »
@Android-80 Thank you

Відсутній samsi

  • Новачок
  • *
  • Повідомлень: 19
  • Рейтинг: +0/-0
Samsung9400 (international section)
« Відповідь #12 : 14:14:13, 19 Листопада 2007 »
Hi!!

I saw in the info file that in the soft works the E*mu 3.8 why 3.8??
The newest one is 6.2 or??

I also found a Emu_9400v1.1.txt in the arcive form E*mu1.1 could anybody please translate it  :confused:

Thanks in advance!!

Відсутній Android-80

  • Ветеран
  • *****
  • Повідомлень: 3002
  • Рейтинг: +3750/-0
Samsung9400 (international section)
« Відповідь #13 : 14:49:32, 19 Листопада 2007 »
EMU of 9400 v1.1

That new:

- The load of the keys and CAID-list is completed.
    Now these information can be loaded in the dear mode and on completion
     a receiver will save Them. Unnecessary to commute a receiver from a stand.

- It is corrected Kard-sharing.
   From now on "fumbling" is possible longer :).  Test.


File for a load through com-port!

With kind regards.

 m@rio

Відсутній samsi

  • Новачок
  • *
  • Повідомлень: 19
  • Рейтинг: +0/-0
Samsung9400 (international section)
« Відповідь #14 : 15:05:22, 19 Листопада 2007 »
Big thanks to you i dont understand everything now but thanks for the translation!!

And do you know why E*mu 3.8 and not 6.2 what can 3.8 do??

 

ident Samsung9400

Автор vlad_ruРозділ Samsung DSR-9400

Відповідей: 1
Переглядів: 2351
Остання відповідь 09:53:06, 22 Листопада 2009
від oleho