Автор Тема: Enigma 2 Nightly Build  (Прочитано 13555 раз)

0 Користувачів і 1 Гість дивляться цю тему.

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Enigma 2 Nightly Build
« Відповідь #30 : 09:39:06, 20 Травня 2009 »
Попри  велику кількість виправлень, дані іміджі і досі містять величезну кількість помилок, відповідно не варто розраховувати на стабільність у роботі.

Відсутній tosat

  • Глобальний модератор
  • Ветеран
  • *****
  • Повідомлень: 1455
  • Рейтинг: +1814/-1
  • Що може бути краще дріма - тільки Дрім HD...
Enigma 2 Nightly Build
« Відповідь #31 : 12:07:32, 20 Травня 2009 »
Точно так..., я навіть не хотів перекладати польского мода.., але якщо хто бажає..
тут можна взяти імідж від РКТ...
 У прикріпленому вкладенню знаходиться архів з рідною мовою.., як встановлювати описано тут...
Dreambox 8000 HD PVR, Toroidal T90 39.0,31.5,28.2,23.5,19.2,13.0,9.0,4.8 East - 0.8,4.0 West
90-75-40(C-band)-36-13-4.8(East)-4.8(West)

Відсутній tosat

  • Глобальний модератор
  • Ветеран
  • *****
  • Повідомлень: 1455
  • Рейтинг: +1814/-1
  • Що може бути краще дріма - тільки Дрім HD...
Enigma 2 Nightly Build
« Відповідь #32 : 16:04:47, 22 Травня 2009 »
Вже появились деякі виправлення для  Enigma2: Enigma2 mod PKT 4.1 in Tideglo E2 rev 0.4.1, україномовний переклад топіком вище, для достовірного відображення в даному моді кириличних літер потрібно закинути з прошивки Tideglo (може бути і стара) з   \usr\share\fonts   шрифти nmsbd.ttf та valis_enigma.ttf .., шрифт nmsbd2.ttf - витерти.., після перезавантаження GUI все буде ок..
Dreambox 8000 HD PVR, Toroidal T90 39.0,31.5,28.2,23.5,19.2,13.0,9.0,4.8 East - 0.8,4.0 West
90-75-40(C-band)-36-13-4.8(East)-4.8(West)

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Enigma 2 Nightly Build
« Відповідь #33 : 11:10:39, 10 Жовтня 2009 »
Enigma 2 Nightly Build: 0.6.0

release 0.6.0
Цитувати
*********************
- fixed positioner setup using step diseqc command
- allowed 1080p 23,97 24 25 29,97 and 30Hz as display resolution
- fixed fastforward and seeking bug in mediaplayer
- added tuxtxt configuration file and a better readable font
- fixed fast forward in timeshift and playing recordings
- fixed slow-motion bug (micro-freezes on SD channels with 4:3 content)
- supported more HDMI tv using 576 output (edid bug should be fixed, report if some tv are not working during the wizard)
- supported MHW epg
- added:
/proc/stb/video/pal_h_start
/proc/stb/video/pal_h_end
/proc/stb/video/pal_v_start
/proc/stb/video/pal_v_end
- fixed a bug on volume value and changes
- fixed some memory leak bugs
- fixed a bug with dhcp

Завантажити

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Enigma 2 Nightly Build
« Відповідь #34 : 14:00:14, 27 Грудня 2009 »
Enigma 2 Nightly Build: version 0.7.5

Цитувати
release 0.7.5
*********************
- added possibility to search channels by channel name's first letter, just press the remote button with the letter in the channel list
- fixed a bug on input box for remote controller keys
- added nc
- fixed some new memory leak bugs on drivers side
- updated enigma2 cvs 15/12/2009 (don't ask me all the change log, it's too big)
- added working subtitles remote button on live tv
- second recording should now be fine when starting while playback and another recording are active
- timeshift (or record + playback) should be more stable
- VCR scart connector now supports input signal, so you can connect other devices to the box and see automatically the TV signal when cuberevo is in standby or in deep-standby
- fixed WSS over 4:3 Scart connector, do not forget to set it in the A/V Configuration menu (let me know if it works good with TVs)
- updated to python 2.6
- added possibility to set Fan by menu (check CuberevoVFD in the plugin menu)
- added possibility to set brightness by menu (check CuberevoVFD in the plugin menu)
- added possibility to set clock in standby by menu (check CuberevoVFD in the plugin menu)
- added possibility to set led by menu (check CuberevoVFD in the plugin menu)
- added possibility to set scroll mode for channels name in the VFD by menu (check CuberevoVFD in the plugin menu)
- updated dreamTV-HD skin (IMHO now is a little bit cooler)
- fixed some VFD icons showing bugs, more need to be added
- fixed DVB subtitles where they were not allowed over some channels (like Universal Channel with Romanian subtitles, TotalTV and so on: report if now it works good)
- fixed a bug were enigma2 doesn't decode teletext pids on some channels (like Mega, Star, ANT1 in package Netmed: report if now it works good)
- udpated webinterface to last 23/12/2009 cvs
- fixed seeking from current position in avi
- fixed user audio delay in seeking
- enable seeking in mp4 files

Enjoy it! Tideglo

Завантажити

Відсутній Android-80

  • Ветеран
  • *****
  • Повідомлень: 3002
  • Рейтинг: +3750/-0
Enigma 2 Nightly Build
« Відповідь #35 : 18:09:58, 27 Грудня 2009 »
Цікаво як працює, наразі нема IPBOX під руками, щоб спрбувати :) А саме головне, чи не випадає зелений екран як в попередніх білдах енігми. Tosat, витягай свій 9000-ий з загашника і протестуй :2funny: *-I

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Enigma 2 Nightly Build
« Відповідь #36 : 17:15:15, 29 Січня 2010 »
Enigma 2 Nightly Build: version 0.8.0

release 0.8.0
*********************
- readded ipkg
- readded optional kernel modules (like external usb card reader, openvpn module and so on)
- readded rcS_user.sh file
- fixed some deadlocks
- CleanupWizard now checks stat on /var/
- updated arab language (credits go to yahya of cubebox board)
- fixed some audio bugs (let me know how the audio is now)
- added persian language (credits go to copol)
- fixed a bug on Unicable
- added by default pacco's sci drivers (so everybody will stops on claiming about this, i thougth it was not too difficult to add them)
- optimized scrolling text on the front panel display (no more blinking effect)
- fixed the menu harddisk manager (format, verify filesystem and so on)
- added channel number in the skin by default
- fixed teletext remote control button interceptor
- the "freezing bug", aka BUGGETTONE, now seems happening less than previous version because of a trick used (this doesn't mean
it is fullfixed)
- enabled PiP function (press red button then blue button, then press OK to select channels, you will enabled the PiP like every enigma2 box),
to use it with mgcamd for example just set boxtype value equal to 06 (this is tested and working for multi descrambling)
- added more compatibility with few mkv files
- fixed CI cams (broken since 0.7.0)
- fixed teletext bug for channel resize
- fixed image resize bug
- updated cutlist editor keymap
- fixed a crash of cutlist editor
- updated keymap for record and timeshift handling (record is managed with REC button, timeshift with PAUSE and STOP buttons)
- updated keymap for deleting backward and forward chars over all the input boxes
- fixed a bug when e2 crashes and teletext is active, at reboot was no more possible to use remote controller
- automatic switch on scart if enabled by "A/V configuration menu" is now working
- enable 12V output over the tuner by default (currently i was not able to fix the 12v option in the e2 menu)
- fixed some bugs on DVDPlayer (thanks skaman)
- fixed GMT time syncronization between enigma2 and front panel display
- added possibility to set in CuberevoVFD plugin panel the daylight and 12h/24h mode in the front panel display time
- solved a bug on enigma2 timers rebooting in a loop after deepstanby
- added BlindScan function (it will works only with Sharp tuner, the only one wich support blindscan, sold by default on all latest DGS stbs)

WARNING: currently the blindscan function is just a sample of how it would works, it must be completed, so i'm not interested in any bug report regarding it

Enjoy it! Tideglo


Завантажити

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Enigma 2 Nightly Build
« Відповідь #37 : 18:59:53, 03 Лютого 2010 »
Enigma 2 Nightly Build: 0.8.5 version

release 0.8.5
*********************
- fixed AC3 audio dropouts over SPDIF with downmix set to off on few HD channels (report if the bug still there on some channels)
- fixed the enable/disable 12v option in advanced enigma2 menu configuration
- fixed a high cpu usage bug on enigma2
- fixed pgup and pgdown buttons, now they are mapped to be used for channel changing
- added possibility to change bootlogo on flash images
- fixed a bug on few receivers that on 0.8.0 made them not working
- fixed a stability bug on all receivers
- fixed bug on the second tuner for scrambled channels
- added NTSC, 480i and 480p video modes support (i don't know if it works or not, i can't test it)

To people having problem with date/time:
since version 0.8.0 date/time is managed on the same way used on DGS firmwares, so if you at first are having a bad value
for date/time, just go into telnet console and type the command: date -s YYYY.MM.DD-hh:mm:ss
Replace YYYY with the year, MM with month, DD with day, hh with hour, mm with minute, ss with seconds.
After this type: cubefpctl --syncfptime
Now set your GMT offset on enigma2 configuration menu.

WARNING: using PIP with the second tuner on scrambled channel could make the tuner stops to work,
a full box restart is needed to make it working again.
I will try to fix this on next versions.

Enjoy it! Tideglo

Завантажити

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Enigma 2 Nightly Build
« Відповідь #38 : 17:30:54, 05 Березня 2010 »
Enigma 2 Nightly Build: 0.9.0 version

Нова версія даних іміджів. Після анонсування білда була помічена помилка при збірці. Завтра tideglo пообіцяв викласти поправлену версію. Для нетерплячих викладаю список змін і посилання на завантаження :)
Цитувати
release 0.9.0
*********************
- migrated to STLinux 2.3
- fixed DVDPlayer crashes with HD skins
- fixed DVDPlayer menus viewing
- fixed many other memory leak bugs
- added a patch on kernel to prevent from old wrong bootargs with bigphysarea param inside (thanks to skaman)
- updated cs language
- updated persian language
- added dropbear (similar to openssh, to start it add into rcS_user.sh the command "/etc/init.d/dropbear start" and the daemon will start)
- fixed epg bug

If you have any kind of problem on setting the time you can force the time update by typing in telnet console the following command:

date -s 2000.01.01-00:00:00

After sent the command you have to made a full reboot, then you will get the time updated after 2/3 minutes on the first channel tuned.

Enjoy it! Tideglo

Завантажити

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Enigma 2 Nightly Build
« Відповідь #39 : 17:14:10, 06 Березня 2010 »
Як і обіцявся tideglo нова версія, точніше виправлення попередноьої версії. Зміни в даному релізі:
Цитата: tideglo
- fixed bad audio/video

release 0.9.0
*********************
- migrated to STLinux 2.3
- fixed DVDPlayer crashes with HD skins
- fixed DVDPlayer menus viewing
- fixed many other memory leak bugs
- added a patch on kernel to prevent from old wrong bootargs with bigphysarea param inside (thanks to skaman)
- updated cs language
- updated persian language
- added dropbear (similar to openssh, to start it add into rcS_user.sh the command "/etc/init.d/dropbear start" and the daemon will start)
- fixed epg bug

If you have any kind of problem on setting the time you can force the time update by typing in telnet console the following command:

date -s 2000.01.01-00:00:00

After sent the command you have to made a full reboot, then you will get the time updated after 2/3 minutes on the first channel tuned.

Enjoy it! Tideglo

Сторінка завантаження

Відносно іміджу - імідж було перенесено на нове ядро STLinux 2.3 і це в свою чергу потягнуло численну кількість помилок у роботі. По відгукам користувачів котрі уже встановили, реліз  можна віднести до нестабільного, проблеми з входом через ftp, помилки при роботі newcs, проблеми з переглядом каналів ХД на польсаті , проблема зі звуком через S/PDIF і т. д.

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Enigma 2 Nightly Build
« Відповідь #40 : 15:15:21, 15 Березня 2010 »
Enigma 2 Nightly Build: 0.9.2 version

Цитувати
release 0.9.2
*********************
- fixed Polsat HD channels and many other HD channels (i.e.: Sky Calcio HD, Sky Olimpia HD and so on)
- updated kernel to version 2.6.23.17-0123
- added gdata for python plugins
- added romanian language (thanks to otheitis and his team)
- improved remote controller responses time
- made general OS system optimizations
- updated Enigma2 CVS to the 13/03/2010
- fixed USB booting for: cuberevo-mini-fta, cuberevo-250hd, cuberevo-2000hd (usb file system must be ext2 type)
- added wifi drivers (zd1211 chipset, if you need them do an insmod /lib/modules/zd1211b.ko)

P.S.: PIP is temporarily disabled.
For USB version boot (file system must be ext2 type): mkfs.ext2 -I 128 -b 4096 your_device
where your_device could be /dev/sdaX, /dev/sdbX, or similar.

Enjoy it! Tideglo

Сторінка завантаження

Відсутній ioan

  • Глобальний модератор
  • Ветеран
  • *****
  • Повідомлень: 1301
  • Рейтинг: +2438/-11
Enigma 2 Nightly Build
« Відповідь #41 : 05:38:41, 26 Березня 2010 »
Вийшов свіжий реліз енігми ,для IP910 можна взяти тут
http://upload.dvhk.pl/content.php?id=138397
Увага- невеликий баг
спочатку ностроюєте мережу і скануєте канали
потім заходите в блу-панель, інакше зелений єкран
« Останнє редагування: 17:51:31, 26 Березня 2010 від ioan »
Малий бізнес в Україні схожий на проституцію. Домагаються всі кому не лінь і кожному потрібно дати

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Enigma 2 Nightly Build
« Відповідь #42 : 08:45:23, 06 Травня 2010 »
Enigma 2 Nightly Build: 0.9.5 version

Нова версія з численною кількістю виправлень/вдосконалень. Версія отримала схвальні відгуки користувачів, з помічених багів варто відмітити відсутність звуку при перемиканні  з сд каналів на хд в режимі скарт.
Зміни:
Цитувати
release 0.9.5
*********************
- перейдено знову на STLinux 2.2 через деякі помилки в аудіо на STLinux 2.3: коли я це виправлю, ми знову повернемось на stlinux 2.3
- додано програвач файлів wmv
- додано функцію мульти декодування: тестовано тільки з incubusCamd 0.99 котрий цілком підтримує мультидекодування
для e2 (previous version don't work, and i don't know if other softcams works or not, just test them)
- виправлення деяких помилок памяті на h264 каналах
- виправлено клавіші дистанційного управління з активацією телетексту
- виправлено падіння DVDPlayer
- кнопки DVDPlayer тепер відображаються краще ніж перед цим
- підтримка аудіо DTS на файлах mkv
- інші виправлення МедіаПлеєра
- оновлено грецьку локаль
- оновлено болгарську локаль
- додано samba (not started by default, you have to add it on the rcS_user.sh if you need it)
- додано cp2101 external card reader drivers (load it in rcS_user.sh if you need it: /lib/modules/cp2101.ko)
- додано ralink rt2870 wireless chipset drivers (load them in rcS_user.sh if you need it: /lib/modules/rt2870sta.ko)
- додано підтримку Freesat ЕПГ
- by default the sci-ng driver (pacco's 1.4 version) is loaded at enigma2's boot: this is a temporary option, i built a
sc driver but still getting many memory errors, i don't know when it will be full ready
- оновлено  Enigma2 CVS до 02/05/2010
- активовано знову функцію кадр в кадрі , перегляд двох каналів у кадрі в кадрі зумовлює сповільнене відтворення, тому це не працює на 100%

Enjoy it! Tideglo

Завантажити

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
Enigma 2 Nightly Build
« Відповідь #43 : 16:54:32, 02 Червня 2010 »
Enigma 2 Nightly Build: 0.9.6 version

Цитувати
- виправлено багато помилок з мультидекодуванням (тепер повинні декодуватись 2 канали на різних тюнерах)
- виправлені деякі падіння пам'яті  програвача
- оновлений CVS Enigma2 від 25/05/2010

Завантажити

Відсутній roger5000

  • Модератор
  • Ветеран
  • *****
  • Повідомлень: 1064
  • Рейтинг: +2835/-1
  • м Тернопіль
Enigma 2 Nightly Build
« Відповідь #44 : 05:41:40, 06 Липня 2010 »
Enigma 2 Nightly Build: 0.9.7 version
Цитувати
release 0.9.7
*********************
- enabled the possibility to use "openvpn --auth-user-pass FILE" command
- update openvpn to last stable release (it should solve problems on connection timeout)
- fixed the bug on recordings playback
- fixed RGB green color on Scart
- fixed AutoSwitch on Scart (so you can set if enable it or not in the enigma2 menu, this is not true
if the receiver is in standby mode: this means you will have always the signal trhought TV scart if something connected to the VCR Scart)
- fixed widesignal over the Scart connector
- fixed Scart's signals on cuberevo-250hd
- some other fixes on Scart to send the good signal to let other devices know that a signal is present
- fixed a bug on tuxtxt
- fixed the bug: channel name on front display when standby mode active in some casual cases
- fixed the bug: channel name on front display when standby mode active after that mediaplayer is used
- added fw_env.config in /etc/ directory, on flash you can edit it in the /var/etc/ directory (usefull for ippe's multibood editor plugin)
- fixed osd screenshot on webif
- /mnt/ directory is now writeable in flash version
- /media/ directory is now writeable in flash version
- little fixes for screen resolution mode changing
- fixed the reading for front panel display settings
- fixed the reading for time settings (let me know if you will find other bugs on getting correctly the time)
- fixed webremote on webinterface
- updated timezone list, more option available now same as the standard (if you find any kind of problem just report it)
- on flash version: now CleanupWizard should not ask you all the time to free the space left
- added possibility to update Date/Time automatically using the CuberevoVFD plugin (usefull for first enigma2 start: just press the yellow button
on the plugin screen and when you will exit from the plugin, the channel tuned will get updates for current date/time)
- fixed many e2 pathes to prevent from unwanted crashes
- optimized a bit the free space (now enigma2 should take less space than previous versions)
- Unicable should be better usable now
- added TuxboxPlugins plugin (wich should run old tuxbox *.so plugins: default directory where to place plugins is "/usr/lib/tuxbox/plugins/")
- first try fix for zd1211b and added also zd1211 wireless driver (insmod the zd1211.ko or zd1211b.ko module if you need to use it)
- first try fix for rt2870/rt3070 wireless driver (insmod the rt3070sta.ko module if you need to use it)
- update Enigma2 CVS to 03/07/2010

About wireless drivers: please report if they are working or not (i can't test them directly)

Enjoy it! Tideglo

Завантажити

 

Wicardd Emu - емулятор для іміджів PB-Powerboard Enigma VX (Enigma1)

Автор bodyanРозділ Wicard для іміджів Enigma1

Відповідей: 5
Переглядів: 4922
Остання відповідь 08:50:04, 29 Листопада 2015
від nik21gr
Список каналів Spark&Enigma для GI S8120

Автор MishkaLРозділ GI S8120

Відповідей: 4
Переглядів: 6804
Остання відповідь 14:26:15, 29 Березня 2015
від DiD /7AHAC
Octagon Enigma 2 PKT-33 Beta release

Автор bodyanРозділ Openbox HD S4 / S5 / S6 / S7 / S8 / S9

Відповідей: 0
Переглядів: 2309
Остання відповідь 11:28:46, 27 Січня 2010
від bodyan
Enigma v1.8 UA транзитне відео через DBox-2 ?

Автор alenikРозділ Енігма ( Enigma)

Відповідей: 4
Переглядів: 2718
Остання відповідь 22:48:32, 06 Липня 2012
від alenik
Обговорення іміджу PB-2xI-ENIGMA

Автор caverРозділ Енігма ( Enigma)

Відповідей: 55
Переглядів: 11653
Остання відповідь 06:57:41, 29 Січня 2010
від andrei_86