Автор Тема: RQCamd  (Прочитано 5296 раз)

0 Користувачів і 1 Гість дивляться цю тему.

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« : 11:14:50, 05 Квітня 2008 »
RQCamd0.69

Цитувати
RQCamd0.69 w/mips support


Quote:
04/04/2008 v0.69
- NEW FEATURES
- First release with multi-processor support. From now on, all rqcamd releases will support all
DM boxes!. The following files are included:

rqcamd.ppc - PowerPC binary. For DM500, DM7000, DM7020, DM600 and Triple Dragon.
rqcamd.mips - Mipsel binary. For DM7025 (and future DM800HD and DM8000HD)
rqcamd.x86 - x86 binary. For standard PC's running Linux.
NOTE: This version is not intended to be used for getting TV, but for offline
playback and debugging of N2 stream files without depending on a live box.

rqcamd.conf - The configuration file. This is the same for all binaries.
rqcamd-readme.txt - This file.

- RELEASE NOTES
- For coders out there: It is all in the same code-base. The following "makes" are available:
make ppc - Makes the PowerPC binary.
make mips - Makes the Mipsel binary.
make x86 - Makes the x86 binary.
make - Makes all binaries.
make distribution - Makes all binaries and creates the distribution files:
rqcamd-0.XX-binaries.tar.gz
rqcamd-0.XX-sources.tar.gz

- ATTENTION: There's still a bug that i'm working out in the MIPSEL version (DM7025). You may get
some freezing. If you do, please report it along with what image you are using.

- Added functionality to show OSD messages in Triple Dragons (thanks megalomaniac).

- NEW
- Fix for current DISH/BEV MECM

RQCAMD v0.69 packages

packages are only for For DM500, DM7000, DM7020, DM600

Відсутній andrey

  • Ветеран
  • *****
  • Повідомлень: 786
  • Рейтинг: +38/-7
RQCamd
« Відповідь #1 : 17:16:01, 05 Квітня 2008 »
bodyan   прохання до вас як шо викладуєте ці всі нові емулятори напишіть будьласка шо і як.. (працює шо відкриває. які з відки ключі..)... можливо ше хтось би хотів знати про них більш докладніше... а то не хочеться експерементувати шоб тюнера не запороти.
DBOX2 PB Enigma 6.0.1 2x1 UA  ASTRA-HOTBIRD-SIRIUS-AMOS
SS2 rev 2.6D

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« Відповідь #2 : 10:46:33, 07 Квітня 2008 »
Дуже сподобалось попереднє повідомлення  :2funny:

RQCamd v0.70

Цитувати
- Fix for freezing on Mipsel binary (DM7025).
- Fix for OSD messages on Mipsel binary (DM7025).

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« Відповідь #3 : 13:41:20, 09 Квітня 2008 »
Rqcamd V 0.71

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« Відповідь #4 : 10:25:48, 17 Квітня 2008 »
RQCamd v0.74

Цитувати
16/04/2008 v0.74
   - Fix for current DISH/BEV MECM's
   
   - ATTENTION: It is confirmed from DMM, there is a bug in the micro-code of the hardware demux of the
     DM7025. Normally this isn't a problem, but because of the way NA providers are doing things,
     this bug causes the occasional freezing you see on the DM7025. In a future release, i'm going to
     implement a brute-force fix that should eliminate the problem with only *minor* inconveniences.

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« Відповідь #5 : 11:31:28, 05 Травня 2008 »
Rqcamd 0.75

Цитувати
04/05/2008 v0.75
   - Added option in config file to force Enigma 1 or Enigma 2 PMT parsing. This is for supporting
     Engima 2 images on PowerPC boxes (i.e. DM7020). See the rqcamd.conf file.
    
   - Added option in config file to force processing of EMM's even when in CS mode. This is useful for
     keeping softcam keys/mecm files updated even when the emu is in CS mode.
    
   - Fix for current DISH/BEV MECM's.

16/04/2008 v0.74
   - Fix for current DISH/BEV MECM's
   
   - ATTENTION: It is confirmed from DMM, there is a bug in the micro-code of the hardware demux of the
     DM7025. Normally this isn't a problem, but because of the way NA providers are doing things,
     this bug causes the occasional freezing you see on the DM7025. In a future release, i'm going to
     implement a brute-force fix that should eliminate the problem with only *minor* inconveniences.

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« Відповідь #6 : 10:49:39, 16 Травня 2008 »
Rqcamd 0.76

Цитувати
   - The emu will first look for .conf file with the same name and path as the executable, if it is not
     found, it'll look for the config file in the following locations (in that order):
        ./rqcamd.conf
        /etc/rqcamd.conf
        /var/bin/rqcamd.conf
        /var/keys/rqcamd.conf
   
     This is useful for co-existence of different versions/configurations of rqcamd in the box.
    
   - Added Support for DGStation devices with native images (finally!): Mutant/Relook/CubeCafe. Just
     set box_type=2 in rqcamd.conf
    
   - Fix for current Dish/BEV MECM.

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« Відповідь #7 : 10:21:25, 19 Травня 2008 »
Rqcamd 0.77

Цитувати
- Small bug fix that caused the emu to crash when tuning to a clear channel on DGStation devices.
- Bug fix for double-tuner support on DGStation devices. It works now.
- Added config option to make emu background execution optional.
- Fixed a bug that prevented the emu from reading .conf files with same name as binary.
- NOTE: CS has been tested (locally and remotely) on single and double-tuner
DGStation devices without incident.

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« Відповідь #8 : 10:28:12, 23 Травня 2008 »
Rqcamd 0.78

Цитувати
- Fix for current Dish/BEV MECM

Відсутній andrey

  • Ветеран
  • *****
  • Повідомлень: 786
  • Рейтинг: +38/-7
RQCamd
« Відповідь #9 : 22:34:10, 24 Травня 2008 »
написали б шо і як з чим їсти.... а то все по англійські чи по німецькі....  аж голова начинає ..... Vic
DBOX2 PB Enigma 6.0.1 2x1 UA  ASTRA-HOTBIRD-SIRIUS-AMOS
SS2 rev 2.6D

Відсутній andrey

  • Ветеран
  • *****
  • Повідомлень: 786
  • Рейтинг: +38/-7
RQCamd
« Відповідь #10 : 22:42:31, 07 Червня 2008 »
 Small bug fix that caused the emu to crash when tuning to a clear channel on DGStation devices.
- Bug fix for double-tuner support on DGStation devices. It works now.
- Added config option to make emu background execution optional.
- Fixed a bug that prevented the emu from reading .conf files with same name as binary.
- NOTE: CS has been tested (locally and remotely) on single and double-tuner
DGStation devices without incident.

для мене те шо пише зверху нічого не зрозуміле... як би було написано на українській мові то я б зрозумів а так....

[Для цього існують перекладачі! наприклад прагма...]
DBOX2 PB Enigma 6.0.1 2x1 UA  ASTRA-HOTBIRD-SIRIUS-AMOS
SS2 rev 2.6D

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« Відповідь #11 : 09:35:41, 24 Червня 2008 »
Rqcamd 0.81

23/06/2008
Цитувати
- Overdue fix for heavy freezing on BEV.

- Fixed a bug that caused the emu to stop working after tuning to a channel with weak or no
signal strength.

- I've included in the source all map calls to date, so it should work when recompiled

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« Відповідь #12 : 15:33:59, 15 Липня 2008 »
Rqcamd 0.82

10/07/2008 v0.82

Цитувати
- Fix for JUN/26/2008 BEV MECM.
- Fix for current DISH MECM

Відсутній bodyan

  • Адміністратор
  • Ветеран
  • *****
  • Повідомлень: 6258
  • Рейтинг: +8349/-14
RQCamd
« Відповідь #13 : 08:35:32, 28 Лютого 2009 »
Rqcamd 1.13

Цитувати
27/02/2009 v1.13
- Added support for Telefonica (provider 7311, South America) in softcam
(no autoroll) and CS mode . You must *uncomment* the "Telefonica"
provider section and *comment* the "Digital+" provider secion in
rqcamd.conf, otherwise it won't work. Also, all proper keys in
Autoupdate.Key and Keylist.txt must be entered as i have not included
these (thanks to giver for help on this).
- Fix for current DISH MECM.